A bare spot is a symptom. If you don’t fix the reason it died, the new grass dies too.
Step 1: Why Did It Die?
| Clue | Likely cause | Fix first |
|---|---|---|
| Round spot, green ring around it | Dog pee | Water the spot after the dog goes, or train a pee zone |
| Turf peels up like carpet | Grubs | Check for grubs |
| Along the driveway or street | Road salt or heat | Flush with water in spring, use salt-tolerant seed |
| Under a tree | Too much shade | Fine fescue, trim branches, or mulch it |
| A worn path | Foot traffic | Stepping stones, or tall fescue |
| Where something sat | Pool, bouncy house, kiddie pool | Just reseed |
More causes and fixes: the damage report.
Step 2: Patch It
- Clear it. Rake out dead grass and debris.
- Loosen the soil. Scratch up the top inch with a metal rake or hand cultivator. Hard soil = dead seed.
- Add a thin layer (about a quarter inch) of compost or topsoil if the soil is poor or the spot is low.
- Spread seed that matches your lawn, at about the new-lawn rate on the bag. Pick your grass.
- Press it in. Step on it or tamp it with the back of the rake so seed touches soil.
- Cover lightly with a thin sprinkle of straw or peat moss to hold moisture. You should still see soil through it.
- Starter fertilizer on the patch, at the bag rate.
Step 3: Keep It Alive
- Water lightly once to three times a day so it never dries out, until the new grass is up and growing. Watering guide.
- Keep feet and dogs off for a few weeks.
- First mow when the new grass reaches about 4 inches.
- Watch the timer: my seed countdown tells you when to expect sprouts.
Timing
Late August through September is best. Spring patches work, but new grass faces summer heat soon after, and most crabgrass preventers stop seed too, so don’t put a regular preventer on patched spots.